MJ Arsenal is a Denver-founded glass brand that builds mini dab rigs: small, low-priced pieces. They are worth buying as a first rig, a travel piece, or a low-cost backup. They make less sense if you already own 14mm accessories or want a large rig with multi-stage percolation. This guide covers the lineup, the prices, what ships in the box, and the trade-offs to check.
MJ Arsenal describes itself as a company founded in Denver, Colorado, built on three pillars: innovation, affordability, and functionality. Its about page says the company has covered its original product line with issued and pending patents plus trademarks, and it publishes no founding year and no manufacturing country. [5]
What you can check directly is the lineup and the prices. The manufacturer’s dab rig collection lists 21 products, with mini rig prices running from about $42 to $99. Every rig the brand describes uses a 10mm joint, and the pieces are borosilicate glass: the Jammer is built from 4mm-thick walls. [2]
The questions buyers ask from there are practical: which model is which, how tall the rigs really are, whether a banger or bucket is included, and where the sources disagree. Each section below answers one of those using the manufacturer’s own specifications and retailer listings, and flags the conflicts rather than smoothing them over.
What is MJ Arsenal, and where are its rigs made?
Start with what the brand says about itself, then look at the gap. MJ Arsenal’s about page describes a consumer-focused glass company founded in Denver, Colorado, built on the three pillars of innovation, affordability, and functionality, and says it has covered its original product line with issued and pending patents plus trademarks. It publishes no founding year, and it publishes no manufacturing country. [5]
Because the brand page is silent on the early history, the retailer accounts do not line up with one another, and the honest way to present them is side by side. One retailer describes MJ Arsenal as launching in 2016 with a palm-sized blunt bubbler called The Martian, founded by Adam Buck and Josh Camitta out of Denver. Other retailer pages date the brand to 2017 or 2018 and describe it as California-based. [7]
The patent record is more specific than any of the marketing copy. US10251419B2 was filed in 2017 and names Josh Camitta as inventor with MJ’s Arsenal LLC as original assignee. Its subject is a water filter configured to receive a rolled product, the design behind the brand’s blunt-bubbler line rather than the mini rigs. The record lists its legal status as active and lists Medusa Distribution LLC as the current assignee. [6]
It is worth being precise about that: the brand’s own collection pages credit the patent portfolio to the original product line generally, and they do not tie it to the mini rigs. The mini rigs themselves are described as handmade from lab-grade 100% borosilicate glass, but the brand still does not say where they are produced. [1]
On manufacturing, state the situation as it stands rather than filling the gap. An authorized reseller’s listing for the Gemini Mini Dab Rig gives its country of production as China, but that is a reseller specification field, not something the manufacturer publishes. [14]
The practical takeaway is that MJ Arsenal is a mini-rig-first brand: the catalog is built around small pieces rather than full-size tubes, and the brand’s stated pillars are affordability and functionality rather than premium glass. If you are still choosing a format rather than a brand, our Hand Pipes category is a different place to start than any single brand page. Our store also carries pieces outside the glass-rig world, such as the SILICONE BEAKER BONG WITH REMOVABLE GLASS BOWL, so it is worth browsing the wider catalog if you are not set on a mini rig yet.
- What the brand states about itself: founded in Denver, Colorado; built on innovation, affordability, and functionality; original product line covered by issued and pending patents plus trademarks; no founding year published. [5]
- What one retailer states: launched in 2016 with a palm-sized blunt bubbler called The Martian, founded by Adam Buck and Josh Camitta, Denver-based. [7]
- What other retailer pages state: the brand dates to 2017 or 2018 and is California-based, a direct disagreement with the 2016 Denver account. [7]
- What the patent record states: US10251419B2, filed in 2017, inventor Josh Camitta, original assignee MJ’s Arsenal LLC, covering a water filter configured to receive a rolled product; status active, current assignee Medusa Distribution LLC. [6]
- What is not stated on the brand’s own pages: a manufacturing country. The brand calls its glass handmade and lab-grade 100% borosilicate but does not say where it is made. [1]
- What a reseller states: a listing for the Gemini Mini Dab Rig gives its country of production as China. Read that as a reseller field, not a manufacturer statement. [14]
Which MJ Arsenal mini rigs can you buy, and what do they cost?
The manufacturer’s mini rig collection page names the Apollo, Gemini, Atlas, Claude, Hydra, Infinity, Jammer, Mini Jig, Royale, Titan, and Ursa, and the brand’s dab rig collection lists 21 products with prices attached. Everything below is the manufacturer’s own collection-page figure at the time of research, and two things are worth knowing before you read it: several models are published as a price range rather than a single number, and at least one model was shown as out of stock. [2]
The range runs from roughly $42 at the low end (Atlas, Claude, Hydra, Jammer) to $99 for the iLL-ien. The Titan, the largest piece in the family, was listed at $69 but showed as out of stock on the manufacturer’s own product page when this was researched. [4]
The pricing trap that catches buyers is that a retailer’s listing is not the manufacturer’s price, and the two can differ noticeably on the same model. The Jammer is a good example: the brand’s dab rig collection lists it at $42 to $46, while our own storefront listing shows the Jammer Mini Dab Rig at $59.99 (SKU 19033). Both figures are real; they are simply different sellers at different moments. Compare them rather than averaging them or assuming one is the true price. [12]
If you want the background on how mini rigs fit into the wider category before picking a model, our Mini Dab Rig vs Full-Size Dab Rig: Which Should You Choose? walks through that comparison directly, and What Is a Dab Rig and How Do You Use One? covers the basics of what a rig is and how one is used. The brand also sells accessories that are not rigs at all, including the MJ Arsenal Dichro Flower Bowl, which is worth knowing if you are building a setup piece by piece rather than buying one model and stopping.
- Apollo: listed at $54-$60. [2]
- Atlas: listed at $42-$46. [2]
- Apex: listed at $78. [2]
- Bloopcycler: listed at $89. [2]
- Claude: listed at $42-$46. [2]
- Column: listed at $44. [2]
- Gemini: listed at $54-$59, and described as shipping with a quartz banger dab nail included. [2]
- Hydra: listed at $42-$46. [2]
- iLL-ien: listed at $99, the top of the published mini rig range. [2]
- Infinity: listed at $58, and described as shipping with a quartz banger. [2]
- Jammer: listed at $42-$46 by the manufacturer, but shown at $59.99 on our storefront listing (SKU 19033), a live example of retailer-versus-brand pricing. [12]
- Mini Jig: listed at $59-$61, and described as 100% borosilicate with a built-in storage jar. [1]
- Plasma Core: listed at $79. [2]
- Royale: listed at $42-$79 across the range; a specialist retailer lists one Royale at $49.99. [9]
- Time Turner: listed at $68. [2]
- Titan: listed at $69 and the largest mini rig in the family at 7 inches, but it showed as out of stock on the manufacturer’s product page at the time of research. [4]
- Triad: listed at $78. [2]
- Voyager: listed at $78. [2]
What are the parts of an MJ Arsenal mini rig?
A mini rig is the same set of parts you would find on a larger piece, just compressed. Walking through them in the order you meet them explains most of what the brand sells and most of what you have to think about when buying accessories later. The descriptions below are the manufacturer’s own, with retailer listings noted where the brand does not publish a spec.
The one spec that matters more than any other is the joint. MJ Arsenal’s own pages put a 10mm connection across the mini rig line: the Hydra page describes an easily accessible 10mm connection, and the Jammer and Titan product pages each list a 10mm joint. The same joint shows up on models across the family, including the MJ Arsenal Infinity Mini Dab Rig. [1]
Terminology is worth a note here, because the same part goes by several names depending on the seller. The heated quartz piece is called a banger, a nail, a bucket, or a quartz bucket. The brand’s own FAQ points out that oil rig is simply another term for dab rig, and recycler and incycler describe different internal water-path designs rather than different quality tiers. None of that changes what the part does; it just means you should read the listing rather than assume a term is standard. [2]
- The joint. A 10mm connection runs across the mini rig line: the Hydra page calls it an easily accessible 10mm connection, and the Jammer and Titan pages each list a 10mm joint, with a third-party Jammer listing confirming a 10mm male joint. This single spec drives every accessory decision you make afterward. [1]
- The heated quartz piece. Called a banger, nail, bucket, or quartz bucket depending on the listing. The brand’s own FAQ notes that oil rig and dab rig are interchangeable terms, so expect wording to vary by seller. [2]
- The percolator. The Jammer uses a reinforced, base-connected percolator with no secondary filtration or recycling step. The Titan uses incycler functionality with a double-ball base-connected perc. The Royale is modeled on the Fab Egg design, with a divided egg chamber and holes that percolate. [3]
- The oil catch. The Jammer’s oil catch is built into the downstem, and the Gemini listing names a built-in reclaim catcher. [12]
- The splash guard. The Titan lists a built-in splash guard, and the Gemini listing does as well. On a short piece this is the part intended to limit water travelling up toward the mouthpiece. [14]
- The body and mouthpiece. The manufacturer states its reason for building these small: a shorter vapor path and a smaller chamber reduce the space vapor has to spread out, which the brand gives as the reason it calls its mini rigs flavor-focused. That is the manufacturer’s stated design rationale, not an independently tested result. [1]
How tall is an MJ Arsenal mini rig, and does the small size change how it works?
There is no single height for the lineup, and the published figures disagree, so the useful answer is a per-model one. MJ Arsenal lists the Jammer at just over 4 inches, with dimensions of 4.25 by 3.25 by 2 inches, and the Titan at 7 by 4 by 2.75 inches. A retailer describes the pieces as typically standing between 5 and 7 inches. A competing retailer lists the Atlas at 4 inches tall on a 2.5-inch base, and an authorized reseller lists the Gemini at 6.5 by 3.75 by 2.75 inches. [3] [4]
The practical takeaway the sources support is simple: check the published dimensions of the exact model you are buying, and check them before you order. One reviewer advised exactly that, noting the rigs are smaller than photos suggest. [9]
What the small format changes is structural rather than anything else. A shorter piece has less glass and fewer places to put a filtration step, so the Jammer runs a single reinforced base-connected percolator with no secondary filtration or recycling. The Royale has a small body and a low water line, and reviewers on a specialist retailer’s Royale page report that the water level is tricky to dial in on a piece that small. [9]
That handling point is the one buyers underestimate. On a piece that stands a few inches tall, the useful water range is narrow, so filling it takes a few extra seconds. [3]
- The Jammer: 4.25 by 3.25 by 2 inches, which the manufacturer describes as just over 4 inches tall. [3]
- The Titan: 7 by 4 by 2.75 inches, the largest piece in the mini rig family, still on a 10mm joint. [4]
- The Gemini: 6.5 by 3.75 by 2.75 inches according to an authorized reseller’s listing. [14]
- The Atlas: 4 inches tall on a 2.5-inch base, per a competing retailer’s comparison page. [10]
- A retailer’s general claim: the pieces typically stand between 5 and 7 inches. This is a retailer’s summary rather than a manufacturer spec. [7]
- Structural difference from the smaller format: the Jammer carries no secondary filtration or recycling step, and the Royale has a small body with a low water line. [9]
- Handling note: customers reviewing the Royale report that the water level is tricky to set on a body that small, and one reviewer advised checking published dimensions before buying because the rigs read smaller in person than in photos. [9]
What comes in the box with an MJ Arsenal mini rig?
This is the section where listings differ the most, so the reliable approach is to go model by model and then read the exact listing you are buying from. The Jammer’s what’s in the box line lists the rig and one Mini Rig Standard Quartz Bucket, with no carb cap. The Gemini is listed with a quartz banger dab nail included, and the Infinity is described as shipping with a quartz banger. [3] [2]
The brand also sells bundle packs that pair a rig with carb caps, quartz nails, quartz buckets, and an MJ Arsenal dab tool, which is the simplest way to make sure you have a matched set rather than buying pieces separately and hoping they fit together. [1]
Where the sources disagree, side by side is the honest presentation. The manufacturer’s own Jammer page lists only the quartz bucket, while a retail brand page states that the pieces come with a standard quartz bucket banger and a flat carb cap included. Those are not compatible claims, so read the what’s in the box line on the exact listing before you assume anything is in the box. [3] [7]
The accessory consequence of a 10mm joint deserves its own note, because it is the single biggest constraint on what you can add later. Any banger, carb cap, or tool you buy for one of these rigs has to be 10mm. One competing retailer states that the 10mm joints will not accept e-nails and make aftermarket quartz bangers and other accessories harder to find, and calls the included banger basic. That page is a sales comparison published by a retailer selling rigs priced at $160 to $300, so read it as one retailer’s stated criticism. [10] [1]
If you want to see what else goes with a rig setup, our Accessories category covers the supporting gear that pairs with a piece like this: carb caps, tools, cleaning supplies, and storage.
- The Jammer: the rig plus one Mini Rig Standard Quartz Bucket, with no carb cap listed in the box contents. [3]
- The Gemini: listed with a quartz banger dab nail included. [2]
- The Infinity: described as shipping with a quartz banger. [2]
- Bundle packs: the brand sells combos that pair a rig with carb caps, quartz nails, quartz buckets, and an MJ Arsenal dab tool. [1]
- The disagreement to watch: a retail brand page says the pieces come with a standard quartz bucket banger and a flat carb cap included, while the manufacturer’s Jammer page lists only the bucket. [7]
- The 10mm limit on add-ons: any banger, carb cap, or tool you buy later has to be 10mm. One competing retailer states the 10mm joints will not accept e-nails and make aftermarket quartz bangers harder to find, and that seller’s own catalog runs $160 to $300. [10]
- What to do about it: read the what’s in the box line on the exact listing, and consider a bundle pack if you want a carb cap you know fits. [1]
How does an MJ Arsenal mini rig compare with a full-size dab rig?
Keep this comparison structural, because that is what the sources actually support. MJ Arsenal’s stated design rationale is that it builds around a shorter vapor path and a smaller chamber, and the brand says the smaller space reduces where vapor has to spread out, which it gives as the reason it calls its mini rigs flavor-focused. Third-party sellers describe the same convention for concentrate rigs generally: less air volume, shorter path. Present it as a design convention rather than a measured outcome. [1]
On size, this brand’s catalog is almost entirely mini. The lineup runs from just over 4 inches on the Jammer to 7 inches on the Titan, and a competing retailer states the pieces show little variation in size. A full-size rig is a different product class: more glass, more internal volume, and room for the larger percolator arrangements you see on bigger tubes. That description of full-size rigs is the general convention for the category rather than a published specification from any one manufacturer. [10]
What the mini format gives up is worth naming plainly. The Jammer carries no secondary filtration or recycling step at all. Small bodies like the Royale run a low water line that takes some care to set. And a 10mm joint narrows your aftermarket options for bangers, carb caps, and e-nails compared with the larger joint sizes used on full-size rigs. [3] [9]
Context matters on that last point: the retailer making the loudest criticism of the 10mm joint sells from a catalog priced at $160 to $300, so its comparison carries that framing. To browse both formats in one place, our Dab Rigs category has the mini rigs and the full-size pieces side by side.
- Vapor path and chamber: the manufacturer builds around a shorter vapor path and a smaller chamber, and cites the reduced space as the reason its rigs are flavor-focused. That is the brand’s stated rationale, not a measured result. [1]
- Size: just over 4 inches on the Jammer to 7 inches on the Titan. A competitor states the brand’s rigs are all mini with little variation in size. [10]
- Filtration steps: the Jammer runs one reinforced base-connected percolator with no secondary filtration or recycling. A larger rig has more glass, which is what allows multi-stage percolation, a category convention rather than a spec from this brand. [3]
- Water line: small bodies such as the Royale run a low water line, which reviewers say takes some fiddling to set correctly. [9]
- Accessory compatibility: a 10mm joint narrows aftermarket banger and e-nail choices, according to one competing retailer. Full-size rigs typically use larger joints with a wider accessory ecosystem. [10]
- Price tier: the brand’s mini rigs run about $42 to $99, while the retailer making the loudest criticism sells rigs priced at $160 to $300. [2]
- Third-party framing: seller descriptions of concentrate rigs generally use the same less-air, shorter-path convention, so it is a broad design idea rather than something unique to this brand. [7]
| What changes | MJ Arsenal mini rig | Full-size dab rig |
|---|---|---|
| Published height | Just over 4 inches (Jammer) to 7 inches (Titan) | Larger than the mini format; sizes vary by maker |
| Vapor path and chamber | Shorter path, smaller chamber | Longer path, larger chamber |
| Filtration steps | One reinforced base-connected perc on the Jammer, no secondary filtration or recycling | More glass and internal volume, which is what allows multi-stage percolation |
| Water line | Low water line on small bodies such as the Royale | More water volume, so the level is easier to set |
| Joint and accessories | 10mm joint across the lineup, which narrows aftermarket choices | Larger joints with a wider accessory ecosystem |
| Published price | About $42 to $99 on the manufacturer’s collection page | Not published by this brand; a competing retailer sells at $160 to $300 |
What are the downsides of an MJ Arsenal mini rig?
Every trade-off below comes from a specific source, and the point of listing them is not to talk you out of the brand. It is to make sure nothing surprises you after the box arrives. Some of these are inherent to any mini rig; others are specific to how this brand does things.
The handling complaints are the most concrete. A specialist retailer’s Royale page and its customer reviews note that the water level is tricky to set on a small body, and one reviewer reported that on their particular unit the included banger sat loosely in the joint and moved freely. That is a single customer report about one unit rather than a pattern across the line, but it is the kind of thing worth checking on arrival. The same reviewer advised checking published dimensions before buying, because the rigs are smaller than photos suggest. [9]
Availability is a real consideration. The Titan, which is the largest piece in the family and the one buyers gravitate to when they want the most glass, was listed as out of stock on the manufacturer’s own product page at the time of research. If you have settled on a specific model, check stock before you plan around it. [4]
Provenance and glass grade are the two honest unknowns. A reseller listing gives the Gemini’s country of production as China, while the brand publishes no manufacturing country of its own. Separately, the brand does not state which borosilicate grade it uses, and not all borosilicate is the same: grades 3.3, 4.9, and 5.4 differ in composition and thermal limits. [14]
To be clear about what that grade number does and does not mean: borosilicate 3.3 is classified as Type 1, Class A under ASTM E-438, has a coefficient of thermal expansion of 3.3 x 10^-6 K^-1, roughly one-third that of soda-lime glass, and can withstand temperature differentials of up to 166 degrees C without cracking. Those figures describe borosilicate 3.3 in general. They are not a verified test of this brand’s glass, and the brand does not say which grade it uses. [8]
- Water-level handling: reviews on a specialist retailer’s Royale page report that the water level is tricky to dial in on a small body. [9]
- Joint fit on a reviewed unit: one reviewer reported that on their particular unit the included banger sat loosely in the joint and moved freely. A single report, not a line-wide pattern. [9]
- Sizing surprise: the same reviewer advised checking the published dimensions first, because the rigs are smaller in person than they look in photos. [9]
- Model availability: the Titan showed as out of stock on the manufacturer’s own product page at the time of research. [4]
- Accessory limits: one competing retailer states the 10mm joints will not accept e-nails and make aftermarket quartz bangers and other accessories harder to find. That retailer sells rigs priced at $160 to $300, so weight the claim accordingly. [10]
- Unpublished provenance: the brand calls its glass handmade and lab-grade 100% borosilicate but publishes no manufacturing country, while a reseller lists the Gemini’s country of production as China. [14]
- Unstated glass grade: the brand does not say which borosilicate grade it uses, and grades 3.3, 4.9, and 5.4 differ in composition and thermal limits. Borosilicate 3.3 is Type 1, Class A under ASTM E-438, has a coefficient of thermal expansion of 3.3 x 10^-6 K^-1, about one-third that of soda-lime glass, and withstands temperature differentials up to 166 degrees C without cracking. Those are general figures for that grade, not a test of this brand’s glass. [8]
What should you check before buying an MJ Arsenal mini rig?
Run this as a short sequence before you order, and most of the surprises in this guide stop being surprises. It takes about five minutes and saves a return.
Two of the steps matter more than the rest. First, dimensions: heights and shapes differ across the lineup, and reviewers warn the pieces read smaller than photos suggest, so check the manufacturer’s page for the exact model rather than a general figure for the brand. Second, the joint: everything the brand describes uses a 10mm connection, so if you already own 14mm bangers or a collection of accessories sized for a larger rig, those will not carry over. [1]
Once you have the model and the joint sorted, compare prices across sellers rather than trusting one number. Retailer listings and the manufacturer’s collection page can differ on the same piece, as they do on the Jammer at $42 to $46 versus $59.99, and that gap is normal rather than a sign that something is wrong. [12]
Finally, the legal side. Cannabis is regulated at the state level in the United States, and rules vary by state, city, and county. California’s Department of Cannabis Control notes that state statutes include rules to keep people under 21 from getting cannabis and that local ordinances can add further restrictions. A nationwide catalog cannot speak for your county, so check your own state and local rules rather than assuming one national rule applies. [11]
We stock MJ Arsenal rigs in our dab rigs category so you can compare the models in one place [13], and free shipping on orders $150+ applies, which is worth factoring in if you are buying a rig alongside accessories like a carb cap or a tool.
- Pick the model, then check that exact model’s published dimensions. Heights and shapes differ across the lineup, and one reviewer warned the rigs are smaller in person than photos suggest. [9]
- Confirm the joint is 10mm, and decide whether the banger or bucket that ships with that model fits the accessories you already own. Everything the brand describes uses a 10mm connection. [1]
- Read the what’s in the box line on the exact listing to see whether a carb cap is included, since included parts differ by model and by seller. [3]
- Check stock before you plan around a specific model, since the Titan showed as out of stock on the manufacturer’s page at the time of research. [4]
- Compare the seller’s price against the manufacturer’s collection-page figure for the same model; the two can differ, as they do on the Jammer at $42-$46 versus $59.99. [12]
- Check your own state, city, and county rules before buying, since cannabis rules vary by location and local ordinances can add restrictions on top of state law. [11]
Frequently Asked Questions
Who is MJ Arsenal?
MJ Arsenal is a glass brand that says it was founded in Denver, Colorado, and that it has covered its original product line with issued and pending patents plus trademarks. Its about page publishes no founding year. Retailer accounts of the start disagree: one says the brand launched in 2016 with a palm-sized blunt bubbler called The Martian, founded by Adam Buck and Josh Camitta, while other retailer pages date it to 2017 or 2018 and call it California-based. [5] [7]
How tall is an MJ Arsenal mini rig?
There is no single height, so check the exact model. MJ Arsenal lists the Jammer at just over 4 inches (4.25 by 3.25 by 2 inches) and the Titan at 7 by 4 by 2.75 inches. A retailer describes the pieces as typically standing between 5 and 7 inches, a competing retailer lists the Atlas at 4 inches tall on a 2.5-inch base, and a reseller lists the Gemini at 6.5 by 3.75 by 2.75 inches. One reviewer also advises checking dimensions before buying, since the rigs are smaller than photos suggest. [3] [9]
Do MJ Arsenal mini rigs come with a banger?
It depends on the model, and the listings do not all agree. The Jammer’s what’s in the box line lists the rig and one Mini Rig Standard Quartz Bucket, with no carb cap. The Gemini is listed with a quartz banger dab nail included, and the Infinity is described as shipping with a quartz banger. The brand also sells bundle packs that add carb caps, quartz nails, quartz buckets, and a dab tool. A retail brand page states the pieces come with a standard quartz bucket banger and flat carb cap, so read the exact product listing you are buying from. [3] [2]
How much do MJ Arsenal mini rigs cost?
The manufacturer’s dab rig collection lists 21 products, with mini rig prices running from about $42 (Atlas, Claude, Hydra, Jammer) to $99 for the iLL-ien. Other published examples include the Titan at $69, the Mini Jig at $59-$61, and the Infinity at $58. Retailer listings can differ from the manufacturer’s page, as ours does on the Jammer Mini Dab Rig at $59.99 (SKU 19033), so compare the seller’s current price against the brand’s own listing for the same model rather than assuming one number is universal. [2] [12]
Can you use other brands’ bangers and accessories on an MJ Arsenal mini rig?
The pieces the brand describes all use a 10mm joint, so any banger, carb cap, or tool you add needs to be 10mm: the Hydra has an easily accessible 10mm connection, and the Jammer and Titan both list 10mm joints. One competing retailer states that those 10mm joints will not accept e-nails and make aftermarket quartz bangers harder to find, and calls the included banger basic. That is one retailer’s stated criticism, published by a seller whose own rigs are priced at $160 to $300. The brand does sell matched carb caps, quartz nails, and tools in its bundle packs. [10] [1]
Where are MJ Arsenal rigs made?
The brand does not publish a manufacturing country. It describes its glass as handmade and as lab-grade 100% borosilicate, and its about page states only that the company was founded in Denver, Colorado. A third-party reseller listing for the Gemini Mini Dab Rig gives its country of production as China, but that is a reseller’s specification field rather than something the manufacturer states. [14] [5]
Are MJ Arsenal mini rigs worth buying?
For the right buyer, yes, with conditions attached. MJ Arsenal’s lineup is small, mostly under $100, and consistent on one spec that matters: everything the brand describes runs a 10mm joint. If you want a first rig, a compact piece, or a low-cost backup, the size and the price work in your favor, and the brand’s stated design rationale around a shorter vapor path and smaller chamber is the logic behind the whole catalog. [1]
The conditions are the trade-offs. A 10mm joint narrows your accessory choices going forward, the small bodies take more care to fill than a large one, the manufacturer publishes no manufacturing country and no borosilicate grade, and the sources disagree on the brand’s early history and on which models include a banger or carb cap. None of those are dealbreakers on their own, but together they mean the mini format rewards a buyer who reads the listing instead of assuming. [9] [14]
The practical path is the checklist above: confirm the model, confirm the dimensions, confirm the joint, read the what’s in the box line, check stock, and compare the seller’s price against the brand’s own figure for the same piece. Do that and you know exactly what is arriving. We stock MJ Arsenal rigs in our dab rigs category, and free shipping on orders $150+. Because cannabis rules work at the state, city, and county level and vary by location, check your own local rules before buying rather than assuming a nationwide standard. [11]
Sources
- MJ Arsenal: Mini Dab Rigs for Sale – Compact and High Performing
- MJ Arsenal: Dab Rigs for Sale | Shop Mini & Full-Size Glass Rigs
- MJ Arsenal: Jammer Mini Dab Rig
- MJ Arsenal: Titan Mini Dab Rig
- MJ Arsenal: About Us
- Google Patents (USPTO record): US10251419B2 – Water filter configured to receive a rolled product
- DiscreetSmoker.com: MJ Arsenal | Mini Dab Rigs, Blunt Bubblers, Bongs & Accessories
- John Morris Group: Borosilicate Glass Explained: Types, Properties & Lab Uses
- 420 Science: MJ Arsenal ‘Royale’ Mini Dab Rig
- Freeze Pipe: MJ Arsenal Mini Rigs vs Freeze Pipe’s Dab Rigs
- California Department of Cannabis Control: California’s cannabis laws
- Treehouse Lifestyle: MJ Arsenal Jammer Mini Dab Rig | Dab Rigs | Treehouse Lifestyle
- Treehouse Lifestyle: Dab Rigs – Treehouse Lifestyle Shop
- TVape: MJ Arsenal Orbital Series Gemini Mini Dab Rig