An e-rig glass attachment changes the water path and the draw, not the heater, and fitment is where most buyers get caught out. The Puffco Peak family shares one glass connection. Dr. Dabber marks every Switch² and Switch GO piece as fitting one device only. The Puffco Pivot uses a twist-on mount. [1][13][15][4]
Prices run from about $40 for a Pivot glass mouthpiece to $300 for Puffco’s own Ryan Fitt recycler. [26][12] A third-party recycler often costs about what a factory replacement glass costs, so the part that matters most is whether it fits the device on your table. [3][23]
This guide covers what the glass changes, how fitment works on each device family, what the upgrade tiers cost, how to fill and clean the glass, and when a replacement is due. Listings and prices change often, so confirm the details with the seller before you order.
What Does an E-Rig Glass Attachment Actually Change?
Start with what the glass does. On an e-rig the battery and the heater stay in the base. The glass sits on top, and it holds the water, the percolator, and the path the vapor travels. Swap the glass and you change the shape of that path and the resistance of the draw. You do not change the heater, the chamber, or the electronics. [1][11]
The names are not standardized. The same class of part is sold as a glass attachment, a top, a bubbler, a mouthpiece attachment, and a recycler. One Treehouse listing calls a $19.99 Pivot piece a top that seals the chamber between hits, while Pulsar sells its Pivot pieces as glass mouthpiece attachments that replace the stock silicone part. [31][25][5]
The build tells you what a piece does. A percolator is the set of holes or channels the vapor moves through. A showerhead sprays vapor down into the water. A honeycomb uses stacked hexagon cells. A slitted perc sends vapor through tall slots. Disc and mini-disc percs use a small drilled plate. [29][30][18][19] A recycler adds external tubes that push water back into the chamber, so the same water moves more than once. An incycler does that recycling inside the piece. [19][14]
The stock Pivot mouthpiece is soft silicone with a directional airpath. A third-party Pivot glass piece replaces that part rather than adding to the device, so it changes the draw and the water path at the same time. [5]
You can also browse by brand. Puffco Accessories and Dr. Dabber Accessories gather the brand-specific pieces, and Replacement Parts covers the general spares that sit outside a single brand.
- Glass attachment: the general term for the glass that sits on an e-rig base. It can be the whole top or just the section above the water line.
- Top: the loosest word in the category. It can mean a glass mouthpiece, a bubbler, or a cap that seals the chamber between hits, like the $19.99 BigFun Pivot tops. [31]
- Bubbler: a top with a water chamber and a percolator for the vapor to move through.
- Mouthpiece attachment: third-party glass that replaces a stock silicone mouthpiece, such as the Pulsar Pivot pieces at $40 each. [25][26]
- Recycler: a bubbler with external tubes that cycle water back into the chamber. An incycler builds that loop inside the glass instead. [19][14]
Will a Puffco Peak Glass Attachment Fit a Peak Pro or the New Peak?
The Peak family is the easiest one to get right, with one honest caveat. Puffco’s support answer is direct: the puck size of the Peak Pro glass attachment has not changed, so almost any attachment made for the original Peak should fit a Peak Pro. [1] Puffco sells two current replacement glasses and lists both as fitting the Peak and the Peak Pro. Peak Pro Glass 2.0 is $100 and Peak Glass is $80. [2][3]
The 2024 New Peak is where the sources disagree. An authorized Puffco retailer says Puffco kept the same base connection across every Peak generation, and that it confirmed the New Peak fit on the shelf. [20] A different independent retailer says the opposite, calling the New Peak the exception because it uses a different attachment system and needs glass made for it. [21] Do not pick a side. Ask the seller to confirm the pairing for your exact unit before you order.
Only the glass top crosses over between models. Chambers and carb caps are model-specific, and Peak glass does not fit a Pivot or a Proxy, since each of those uses its own glass. [20] Height matters too. The Peak Pro Glass 2.0 is taller than the original Peak glass and will not fit the original Peak travel case, so an upgrade can quietly change what you are able to carry. [20]
One last detail catches people out. Every Puffco glass piece is hand blown, and the manual says pieces may vary slightly in size. Fit, water capacity, and the way a top sits on the base can differ a little from piece to piece. [11]
For the wider context, What Is Puffco and How Do the Peak, Peak Pro, and Proxy Compare? compares the Peak, the Peak Pro, and the Proxy, and Which Vaporizer Accessories and Replacement Parts Are Actually Worth Buying? covers the accessory side of the range. When Should You Replace Bowls, Downstems, Screens, and Seals? lays out when bowls, downstems, screens, and seals need swapping. If you are still weighing a device like this against a traditional rig, E-Rig vs Traditional Dab Rig: Which Should You Choose? sets the two side by side. For the Dr. Dabber lineup, What Is Dr. Dabber and How Do the Switch², Switch GO, Ghost², and XS Compare? is the place to start.
- 1. Confirm the device generation first. The original Peak, the Peak Pro, and the Peak Pro 3DXL share the glass connection. For the 2024 New Peak the sources conflict, so have the seller confirm the pairing with you. [1][20][21]
- 2. Confirm the part is glass only. Chambers and carb caps are model-specific, and a top that belongs to one model will not serve another. [20]
- 3. Check the height against your case. The Peak Pro Glass 2.0 is taller than the original Peak glass and does not fit the original Peak travel case. [20]
- 4. Ask whether the piece is hand blown. Puffco says each piece may vary slightly in size, so fit and water capacity can differ from one to the next. [11]
- 5. Keep the old glass until the new one is seated and holding water. A top that looks right can still sit differently on the base than the one it replaces.
Do Dr. Dabber Switch² and Switch GO Glass Attachments Interchange?
Dr. Dabber runs the opposite policy from Puffco. Every Switch glass piece carries a line saying it fits one model only. The Switch² replacement is marked as compatible with Switch² only, and the Switch GO replacement is marked as compatible with Switch GO only. [13][15] Even though both devices carry the Switch name, the glass does not cross over between them. [14][16]
Each platform has two tiers. The replacement glass is the plain factory piece: $79.95 on the Switch² and $59.95 on the Switch GO, both custom blown with a laser-cut percolator. [13][15] The step-up tier is the Incycler, at $134.95 on the Switch² and $99.95 on the Switch GO, with a separate $119.95 Inline Recycler glass listed for the GO. [14][16] Dr. Dabber describes the Incycler as a more restricted pull with more cooling along the path. That is a change to the water path and the draw, not to the heater. [14][17]
Two handling details are worth knowing before you order. Every Switch² kit already ships with a Quartz Insert, a standard glass attachment, a Drop heated cutting and loading tool, and a charging cable, so Switch² glass is always a replacement or an upgrade rather than a first purchase. [17] The glass also comes off from the bottom: Dr. Dabber says to rest both hands on the crown and push upward from the base of the glass with both thumbs, because pulling the glass up by the mouthpiece can break it and cause injury. [17]
There is an alignment step that is easy to miss. Switch² glass has a cloud pathway mark on the back, and it has to line up with the line on the device so the path seals correctly. [17] Get that wrong and the top is a fitment error rather than a cosmetic one.
One more point for older owners. Dr. Dabber lists its current glass line by device family, so anyone on an earlier Switch generation should confirm that a part is still made for their exact model rather than assuming a Switch² piece descends from it. [13][15]
- Switch² glass fits Switch² only, and every Switch² piece Dr. Dabber sells says so on its own page. [13][14]
- Switch GO glass fits Switch GO only, and the two families are priced separately. [15][16]
- Replacement tier: $79.95 on the Switch² and $59.95 on the Switch GO, both custom blown with a laser-cut percolator. [13][15]
- Incycler tier: $134.95 on the Switch² and $99.95 on the Switch GO, plus a $119.95 Inline Recycler for the GO. [14][16]
- Removal is from the bottom. Push up with both thumbs under the glass and never pull by the mouthpiece. [17]
- Alignment matters, and upgraded glass can be bulkier. The Tour Bag fits the unit with the standard glass installed, so a bigger top may need to come off to pack. [17]
What Glass Options Does the Puffco Pivot Take?
The Pivot is a third fitment family, and it is not a Peak in disguise. Its mount is a twist-on quick-release that takes a chamber, not a Peak-style glass top. [4][5] The Pivot ships as a base, a chamber, and a mouthpiece for $150, and the stock mouthpiece is soft silicone with a directional airpath. [5]
That leaves two ways to add glass. The first is a third-party glass mouthpiece attachment that replaces the silicone part. Treehouse Lifestyle stocks two Pulsar pieces for the Pivot at $40 each: a 4.3-inch Incycler build with a Swiss percolator, and a 5-inch Fab Egg with a perforated fixed diffuser downstem. [25][26] Pulsar’s own Pivot bubbler sits at $39.99, which puts $40 right at the going rate for this class of glass. [25]
The second path is the Pivot Glass Adapter at $60. It includes a quick-release 3D Chamber plus 10mm and 14mm glass joints. You twist the adapter onto the base and insert the joint into a rig you already own. [4] That is the alternative to buying a dedicated Pivot bubbler top.
Two mix-ups are easy to make here. Peak glass does not fit a Pivot, because each device uses its own glass. [20] And the $19.99 BigFun Pivot tops are not bubblers at all. Treehouse describes them as caps that seal the chamber between hits and twist off for loading. [31]
- Twist-on mount: the Pivot takes a chamber on a quick-release twist, not a Peak-style glass top. [4][5]
- Path one, a glass mouthpiece attachment: it replaces the stock silicone mouthpiece, so the draw and the water path change together. [5]
- Pulsar Incycler for the Pivot, $40: 4.3 inches, built on an incycler shell with a Swiss percolator. [25]
- Pulsar Fab Egg for the Pivot, $40: 5 inches, with a perforated fixed diffuser downstem. [26]
- Path two, the Pivot Glass Adapter at $60: a quick-release 3D Chamber plus 10mm and 14mm joints, so the Pivot can run through a rig you own. [4]
- Not bubblers: the $19.99 BigFun Pivot tops are chamber caps, and Peak glass does not fit a Pivot at all. [31][20]

Is a Third-Party Recycler Worth It Compared With Replacement Glass?
Here is the value argument for upgrading. A third-party recycler often costs about the same as a factory replacement glass, and you get a different water path for the money. Puffco’s own Peak Glass is $80 and Peak Pro Glass 2.0 is $100. [3][2] Treehouse Lifestyle lists the two Pulsar Peak and Peak Pro recycler attachments at $97 each, and Pulsar’s own site lists the equivalents at $96.99 and $97.99. [23][24][18][19]
The same pattern runs through the Switch line. The Switch² replacement glass is $79.95 and the Incycler is $134.95. [13][14] The Switch GO replacement is $59.95 and its Incycler is $99.95. [15][16] Treehouse carries a Dr. Dabber Switch GO glass bubbler at $70 and a Switch² glass attachment at $89.99. [27][28]
At the top of the range, Puffco sells the Ryan Fitt Recycler Glass 2.0 at $300 and the Peak Pro Travel Glass at $125. [12] Treehouse lists the Ryan Fitt recycler at $250, and it was out of stock when this guide was checked. [32]
Construction is where the tiers separate. The OEM Peak Pro Glass 2.0 uses a spiral interior with five laser-cut perc slots, while the $80 Peak Glass uses two sets of laser-cut perc holes at the base. [2][3] Pulsar’s Upright Recycler is 6.75 inches tall with exterior recycler pipes and an interior disc percolator, and the Triple Tube Recycler is 5.75 inches with a triple tube system and a mini disc percolator. [18][19] Treehouse also carries two Grateful Dead pieces: a 6-inch Stealie attachment set at $79.99 with showerhead and honeycomb percolators plus a matching ball carb cap, and the 6.75-inch Stealied Out at $69.90 with a large slitted percolator, fab and ladder diffusers, and a matching ball carb cap. [29][30]
One note on names, because it affects how you read a listing. The Stealie attachment set carries two different maker names on the same SKU: its title says Grateful Dead x blast, while its own description says Grateful Dead x Pulsar Sandblast. [29] Read the maker as unconfirmed, and judge the piece on its listed percolators and its Peak and Peak Pro fitment instead.
- 1. Compare against the factory piece you would replace. A third-party recycler at $97 sits between the $80 OEM Peak Glass and the $100 Peak Pro Glass 2.0. [2][3][23]
- 2. On the Switch line the step-up costs more than the stock glass: $134.95 against $79.95 on the Switch², and $99.95 against $59.95 on the GO. [13][14][15][16]
- 3. Read the construction rather than the word recycler. Exterior tubes, disc and mini-disc percs, showerhead and honeycomb percs, and slitted percs with fab and ladder diffusers all describe different water paths. [18][19][29][30]
- 4. Check the maker before you trust the name on a listing. The Stealie set carries two maker names on a single SKU. [29]
- 5. Price the shipping threshold with the glass. Treehouse Lifestyle offers free shipping on orders $150+.
| Part | Price | What the construction adds |
|---|---|---|
| Puffco Peak Glass (OEM) | $80 | Two sets of laser-cut perc holes at the base |
| Puffco Peak Pro Glass 2.0 (OEM) | $100 | Spiral interior with five laser-cut perc slots |
| Pulsar Peak/Pro recycler #3 | $97 | 5.75 inches, triple tube system with a mini disc perc |
| Pulsar Peak/Pro recycler #2 | $97 | 6.75 inches, exterior recycler pipes with a disc perc |
| Grateful Dead Stealie attachment set | $79.99 | Showerhead and honeycomb percs plus a ball carb cap |
| Grateful Dead Stealied Out | $69.90 | Slitted perc with fab and ladder diffusers |
| Dr. Dabber Switch² replacement glass | $79.95 | Custom blown with a laser-cut percolator |
| Dr. Dabber Switch² Incycler | $134.95 | Step-up tier built around a more restricted pull |
| Dr. Dabber Switch GO replacement glass | $59.95 | Custom blown with a laser-cut percolator |
| Dr. Dabber Switch GO Incycler | $99.95 | Step-up tier built around a more restricted pull |
| Puffco Ryan Fitt Recycler Glass 2.0 | $300 | Spiral fluted inner funnel with dual recycling tubes |
How Do You Fill and Clean an E-Rig Glass Attachment?
Filling and cleaning are where most mistakes happen, and both brands are specific about it. Start with the rule that applies to every device: the glass comes off the base before it gets water. Puffco says to remove the glass top before filling and never allow water into the lower section. [7][8]
Then fill through the mouthpiece to a landmark. Puffco’s guidance for the Peak Pro is water just above the air holes, and its New Peak page says just above the perc holes. [7][8] Dr. Dabber uses the perc holes for the Switch² glass, adds that overfilling can cause splashback, and notes that you can run more or less water depending on how hard you draw. [17]
Cleaning methods differ by brand. Puffco says to submerge Peak glass in 99% isopropyl, rinse it with water, and let it dry fully before reattaching, and it recommends 90% or higher in general because lower percentages carry water content. [9][10][11] Dr. Dabber says to fill the Switch² glass with isopropyl and shake it, add a tablespoon of table salt for stubborn residue, rinse with warm water, and air dry completely before reinstalling, and it recommends 91% or higher. [17]
The drying step is a fire precaution rather than a flavor note. Isopropyl alcohol has a flash point of 53 degrees Fahrenheit and is classified as a Class IB flammable liquid, so a part that is still wet has no business sitting next to a warm device. [22] The same rule applies to soak jars and cotton swabs.
- 1. Remove the glass from the base first. Every Puffco instruction starts here, and Dr. Dabber’s removal method is a push up from the bottom with both thumbs. [7][8][17]
- 2. Fill through the mouthpiece to just above the air holes or perc holes, depending on the model. [7][8][17]
- 3. Keep the lower section of the glass and the base dry. Puffco’s manual says do not allow water into the base at any time. [7][11]
- 4. On the Switch², line the cloud pathway mark up with the line on the unit before you fill. [17]
- 5. For Puffco glass, submerge it in 99% isopropyl, rinse with water, and let it dry fully before it goes back on. [9][11]
- 6. For Switch glass, fill the glass with isopropyl and shake it. A tablespoon of table salt helps with stubborn residue. [17]
- 7. Use 90% or higher isopropyl for Peak parts and 91% or higher for Switch parts, and let every part air dry completely before it touches the device. [10][17][22]

When Should You Replace an E-Rig Glass Attachment?
Glass gets replaced for a small number of clear reasons. A chip or crack at the joint comes first, because the joint is where the glass meets the base, and a crack there is a replace-now problem rather than a clean-it-up problem. [6][7]
Second is evidence that water has reached the lower chamber or the base. Puffco’s manual says do not allow water into the base at any time, and both cleaning guides warn against water seeping into the bottom of the glass. [7][9][11] Third is buildup that soaking no longer clears. [9]
The warranty decides what happens next. Puffco’s limited warranty covers the electronic base and the battery only, and it does not cover glass, atomizers, normal wear and tear, or damage from accident or abuse. [6] New devices carry two years unless otherwise specified, with shorter windows for chambers and one month for Pivot and OG Peak chambers. Glass sits outside all of it. [6]
The policy is also void where the device was used with aftermarket accessories such as mouthpieces Puffco has not approved or endorsed, and that clause sits directly on top of the third-party glass market. [6] Before you order the second one, confirm three things: the exact device generation, the part class, and whether the top you are replacing was factory stock or an upgrade you already paid for. [20]
- 1. Replace now if there is a chip or a crack at the joint. Glass is not covered by the limited warranty. [6]
- 2. Replace if water has reached the lower chamber or the base. The manual says no water in the base at any time. [7][11]
- 3. Replace when soaking no longer clears the buildup. [9]
- 4. Plan on paying for the glass yourself. The warranty covers the electronic base and battery and excludes glass, atomizers, wear and tear, and accident or abuse. [6]
- 5. Read the aftermarket clause before you swap the stock part. The warranty is void if the device was used with mouthpieces Puffco has not approved. [6]
Frequently Asked Questions
Will a Puffco Peak glass attachment fit a Peak Pro?
Puffco’s own support answer says the Peak Pro glass connection point has not changed from the original Peak, so attachments made for an original Peak should fit a Peak Pro. [1] Puffco also sells both of its current replacement glasses as compatible with the Peak and the Peak Pro, at $100 for the Peak Pro Glass 2.0 and $80 for the Peak Glass. [2][3] That crossover covers the glass top only. Chambers and carb caps stay model-specific, and Peak glass does not fit a Pivot or a Proxy. [20]
Does the 2024 New Peak take the same glass as the original Peak?
Sources conflict, so confirm before you buy. Puffco lists its $80 Peak Glass as compatible with both the Peak and the Peak Pro. [3] An authorized Puffco retailer says it has confirmed the New Peak fit on the shelf and that every Peak generation shares the base connection, while another independent retailer states the New Peak uses a different attachment system and needs glass made specifically for it. [20][21] Ask the seller to check the pairing with your exact unit.
Will a Dr. Dabber Switch² glass attachment fit a Switch GO?
No. Dr. Dabber marks every Switch² glass piece as compatible with the Switch² only, and every Switch GO piece as compatible with the Switch GO only. [13][15] The two families are priced separately too. Switch² replacement glass is $79.95 and its Incycler is $134.95, while Switch GO replacement glass is $59.95 and its Incycler is $99.95. [14][16]
Does using aftermarket glass void my Puffco warranty?
Puffco’s limited warranty explicitly does not cover glass, atomizers, normal wear and tear, or damage from accident or abuse, so a cracked or chipped top is a replace-at-your-cost event rather than a claim. [6] The policy also states that the warranty is void if the device was used with aftermarket accessories such as mouthpieces Puffco has not approved or endorsed, a clause that sits directly over the third-party glass market. [6]
How much water goes into an e-rig glass attachment?
Take the glass off the base first, then fill through the mouthpiece. Puffco says fill to just above the air holes, and its New Peak guidance says just above the perc holes. [7][8] Dr. Dabber says fill to just above the perc holes and warns that overfilling can cause splashback. [17] Neither maker allows water in the lower section of the glass or in the device base. [11]
What glass fits a Puffco Pivot?
The Pivot uses a twist-on quick-release mount, so it takes glass mouthpiece attachments that replace the stock silicone mouthpiece, or the $60 Pivot Glass Adapter, which includes a quick-release 3D Chamber plus 10mm and 14mm glass joints so the device can run through a rig you already own. [4][5] Peak glass does not fit a Pivot, because each device uses its own glass. [20]
So Which E-Rig Glass Attachment Should You Buy?
Start with the device, not the glass. If you own a Puffco Peak, Peak Pro, or Peak Pro 3DXL, most original Peak glass will fit, and Puffco sells two current replacements that list both the Peak and the Peak Pro. [1][2][3] If you own a Dr. Dabber Switch² or Switch GO, the model name on the device is the whole decision, because each piece of Switch glass fits one device only. [13][15] If you own a Pivot, you are choosing between a glass mouthpiece attachment at $40 and a $60 adapter for a rig you already own. [25][4]
When you are ready to upgrade, price the tiers. A third-party recycler on a Peak runs about the same as factory replacement glass, the Switch step-up tier costs noticeably more, and Puffco’s own top-tier recycler sits at $300. [23][13][12] Treehouse Lifestyle offers free shipping on orders $150+.
Take care of the glass the way the maker describes, because a replacement is your own cost when something chips. Remove it before filling, fill only to the landmark, clean it with high-percentage isopropyl, and let it dry fully before it goes back on. [7][9][17]
One last note for a nationwide guide: cannabis rules vary by state and cannabis remains illegal at the federal level, so check your own state’s requirements before you buy or carry anything.
Sources
- Puffco: Are glass attachments for the original Peak compatible with my Peak Pro? (Puffco Support)
- Puffco: Peak Pro Glass 2.0
- Puffco: Peak Glass
- Puffco: Pivot Glass Adapter
- Puffco: Pivot
- Puffco: Puffco Warranty Policy
- Puffco: How do I use my Puffco Peak Pro? (Puffco Support)
- Puffco: How do I use the new Peak? (Puffco Support)
- Puffco: How do I clean my Peak Pro? (Puffco Support)
- Puffco: What is the best cleaning solution to use for my Peak Pro? (Puffco Support)
- Puffco: Puffco Peak Pro Instruction Manual
- Puffco: Peak Pro 3DXL Overview
- Dr. Dabber: Switch² Replacement Glass Attachment
- Dr. Dabber: Switch² Incycler Glass Attachment
- Dr. Dabber: Switch GO Replacement Glass Attachment
- Dr. Dabber: Switch GO Incycler Glass Attachment
- Dr. Dabber: Switch² Knowledge Base (Dr. Dabber support)
- Pulsar: Pulsar Upright Recycler Bubbler for Puffco Peak Series
- Pulsar: Pulsar Triple Tube Recycler Bubbler for Puffco Peak Series
- Angies Boutique (independent retailer, authorized Puffco retailer): Puffco Peak & Peak Pro Glass Attachments
- Encore Collection (independent retailer): Puffco Peak vs Peak Pro: What’s the Difference?
- Centers for Disease Control and Prevention / NIOSH: NIOSH Pocket Guide to Chemical Hazards — Isopropyl alcohol
- Treehouse Lifestyle: Pulsar Puffco Peak/Pro Recycler Attachment #3 — 5.75"
- Treehouse Lifestyle: Pulsar Puffco Peak/Pro Recycler Attachment #2 — 6.75"
- Treehouse Lifestyle: Pulsar Incycler Bubbler Glass Mouthpiece Attachment for Puffco Pivot — 4.3" / Clear
- Treehouse Lifestyle: Pulsar Fab Egg Bubbler Glass Mouthpiece Attachment for Puffco Pivot — 5" / Clear
- Treehouse Lifestyle: Dr. Dabber Switch GO Glass Bubbler Attachment
- Treehouse Lifestyle: Dr. Dabber Switch 2 Glass Attachment
- Treehouse Lifestyle: Grateful Dead x blast Stealie Attachment Set for Puffco Peak — 6"
- Treehouse Lifestyle: Grateful Dead Stealied Out Attachment for Puffco Peak — 6.75"
- Treehouse Lifestyle: BigFUN! Tricolor Pivot Tops
- Treehouse Lifestyle: Puffco Peak Pro Ryan Fitt Recyclers

