A steamboat bubbler is a compact upright water pipe shaped like a small boat-hulled can. The name is a product label, not a standard pipe category, and two very different pieces are sold under it. What actually matters is the spec: the material, the chamber layout, and the bowl type.
MJ Arsenal’s Steamboat Bubbler is a 3.9 by 3.7 inch borosilicate glass upright can with milled black walnut accents, an 18mm built-in funnel bowl, a fixed downstem feeding a single water chamber, and a carb on the left side [1][4]. Ooze sells a piece under the same name that wraps multiple glass chambers in a silicone sleeve and ships with both a glass bowl and a quartz banger [7].
So before you buy anything called a steamboat, read the material, the chamber layout, and the bowl spec on the listing instead of trusting the label. The body shape tells you how the piece will be held and filled. The spec tells you what you are actually getting.
What Is a Steamboat Bubbler, and Is It a Recognized Pipe Style?
A bubbler is a compact water pipe. Its body is tall enough that a downstem can run from the bowl down into a chamber holding water, which is the thing that separates it from a spoon pipe [8]. Where a bong stacks smoke in a large chamber before you draw it, a bubbler begins delivering shortly after the draw starts [8]. Water inside the body, and no big reserve, define the whole family.
Steamboat is not one of the category words. It does not appear in the usual list of bubbler body shapes, which runs hammer, Sherlock, double, and triple, along with metal and silicone versions of each [8]. It is a product name, and the pieces sold under it have almost nothing in common beyond being water pipes.
The MJ Arsenal version does have a clear home on the shelf. It belongs to the water-filled half of the Hand Pipes range, and its upright cylinder with a flattened foot takes up about as much room as a mug. For a sense of how much the shape varies inside that same shelf, compare it with the SeshGear Round Ball Glass Water Pipe – 4.5" / 14mm F / Colors Vary, which is a round body instead of a can.
The two listings describe very different objects:
- MJ Arsenal Steamboat Bubbler — 100% borosilicate glass with milled black walnut on the base and mouthpiece trim, a fixed downstem, and a built-in 18mm funnel bowl [1][6].
- Ooze Steamboat Bubbler — several glass chambers held inside a silicone sleeve, supplied with a glass bowl and a quartz banger so the same body can be set up as a water pipe or as a dab rig [7].
- The shared word is a name, not a spec. Material, chamber count, and bowl type are what you actually compare.
How Is a Steamboat Bubbler Different From a Hand Pipe or a Bong?
The three forms are easiest to tell apart on things you can see in a product photo: how tall the body is, whether water sits inside it, whether the bowl lifts out, and how you hold the piece [8][9].
A hand pipe is a dry piece. There is no chamber and no water, so nothing sits between the bowl and the mouthpiece except the body of the pipe. A bubbler keeps the handheld format but adds height, and that height is what buys room for a downstem and a water chamber [8]. A bong is the large water pipe, with a bigger bowl and enough volume to hold smoke before you draw it [9].
Four Treehouse guides pick up where this comparison leaves off. For the two water forms head to head, see What Is the Difference Between a Bubbler and a Bong?. The dry side of the shelf gets the same treatment, so see What Are Hand Pipes and Bubblers, and How Do They Differ? for hand pipes next to bubblers. For the other body shapes inside the category, see How Do You Choose the Right Bubbler for You?. A steamroller is the opposite approach, a straight dry chamber with no water at all, and What Is a Steamroller Pipe and How Does It Work? explains how that form works. Buyers who are new to all of this should start with What Is the Best Smoking Piece for a Beginner?.
- Body — a hand pipe is short and dry, a bubbler is taller than a spoon pipe so a downstem can reach water, and a bong is the large standing water pipe [8][9].
- Water — none in a hand pipe, a small chamber in a bubbler, a full chamber in a bong [8].
- Bowl — small and often fixed on a hand pipe, built into the glass on the Steamboat, larger and usually removable on a bong [5][9].
- Grip — a hand pipe and a bubbler are held in the hand, while a bong is large enough that it usually rests on a surface between draws [9].
| Feature | Hand pipe | Bubbler | Bong |
|---|---|---|---|
| Body | Short and dry | Taller than a spoon pipe, still handheld | Large standing water pipe |
| Water | None | Small chamber in the body | Full chamber |
| Bowl | Small, often fixed | Built into the glass on the Steamboat | Larger, usually removable |
| Grip | Held in one hand | Held in one hand | Usually rests on a surface |


What Are the Parts of the MJ Arsenal Steamboat Bubbler?
The Steamboat is built in three separable groups: one glass body, a walnut base, and a walnut mouthpiece trim [6]. That breakdown is why the cleaning routine later in this guide works at all, since the wood comes off so the glass can be soaked on its own. From the foot up, here is what each part does.
Two of those parts are worth dwelling on. The bowl is 18mm and formed into the glass rather than seated in a ground joint, so there is no separate bowl piece to buy, swap, or lose [4][5]. The downstem is molded into the same unit, which is what keeps a body this small from having joints that work loose [6].
The carb deserves its own line, because it is the only way the chamber gets cleared. On a bong the removable bowl does that job by letting air in from below. Here the bowl stays put, so the hole on the left side does the work and your thumb is the valve [11][4].
- Walnut base — a detachable milled black walnut foot that holds the glass upright and comes off before cleaning [1][6].
- Glass chamber — the borosilicate upright can, 3.9 inches tall and 3.7 inches across, that holds the water [1][6].
- Fixed downstem — the tube running from the bowl down into the chamber, molded as part of the body so it cannot be pulled out [6].
- Funnel bowl — an 18mm bowl built directly into the glass instead of sitting in a removable joint [4][5].
- Left-side carb — the small hole beside the bowl that you cover and uncover with a thumb to control airflow [4][11].
- Walnut mouthpiece trim — a detachable walnut ring at the top of the glass that comes off with the base [1][6].
How Do You Fill and Draw From a Compact Bubbler?
The sequence on a compact upright piece is short, and nearly every mistake happens in the first two steps. Take those slowly and the rest becomes automatic.
The water level is the step people get wrong. Fill it so the downstem tip sits under the surface and the draw works, then stop. A chamber this small does not need much, and a level that is too high throws water up toward the mouthpiece on a fast draw [5]. It is easy to add a splash more and annoying to pour some back out, so start shallow and test.
The water does two jobs here. It absorbs some of the heat from the smoke passing through, and the bubbling breaks that flow into smaller pockets with more surface area [10]. That is a temperature and flow effect, not a promise about what the smoke contains. Health Canada’s accessory guidance is direct that water in a pipe does not make smoking risk-free, and it recommends glass or ceramic over plastic because plastic can release chemicals when it is heated [12].
Empty the chamber after a session rather than leaving water sitting in it, and change the water regularly if the piece stays out on a shelf and gets used often [10].
- Set the piece on a flat surface with the walnut base on, and check that the downstem tip is inside the chamber [6].
- Add a small amount of water, enough to cover the downstem tip and low enough that a draw does not throw water toward the mouthpiece [5].
- Cover the carb with your thumb before you light, so the air path runs through the bowl [11].
- Bring the flame to the bowl while drawing, then release the carb so incoming air pushes what is left in the chamber out through the mouthpiece [5][11].
- Cover the carb again to repeat, then empty the water when you are finished instead of leaving it to sit [10].
How Do You Clean a Bubbler and Keep the Walnut Accents Looking Good?
The maker splits this routine by material, and the split is not a suggestion. Isopropyl alcohol is right for the glass and wrong for finished walnut, so both walnut sections come off before any liquid shows up [1][5].
How often depends on use. A piece used daily wants the glass rinsed and the water changed every day, since the water in a pipe is not meant to be stored between sessions [10]. A piece that comes out once a week can go longer between full soaks, though the chamber should still be emptied after each use rather than parked full.
Two material notes are worth keeping. Borosilicate glass has a very low coefficient of thermal expansion, about 3 x 10^-6 per degree Kelvin at 20 degrees Celsius, which lets it handle a temperature differential of roughly 330 degrees Fahrenheit without fracturing [13]. That tolerance is not unlimited, and it does not make the piece unbreakable: it is still glass and it will break if it is dropped or knocked against a hard edge [5].
Keep the glass out of the dishwasher, avoid moving it straight from a hot rinse into cold water, and let the walnut dry completely before it goes back on the body. Wood that is wiped and aired rather than left damp holds its finish better over time [1].
- Take the piece apart first, removing the walnut base and the walnut mouthpiece trim from the glass [6].
- Soak the borosilicate glass in isopropyl alcohol, or use the Alpine collection routine of salt plus isopropyl alcohol, a soak, a gentle scrub, and a rinse [1][2].
- Clean the non-glass sections with a microfiber cloth and warm soapy water, keeping them out of the alcohol entirely [1].
- Rinse every part before it goes back together [1].
- Air dry the glass and let the walnut sections dry fully before reassembly [2].
How Does the Steamboat Compare With the Mesa and Other Alpine Series Bubblers?
Inside the Alpine Series the material story is shared across the line: borosilicate glass with smooth wood-grain accents, and removable components so the parts that contact water are glass or metal [2]. That makes the choice between the two $42 bubblers a question of form rather than budget.
The Steamboat is the smaller of the pair by half an inch on each axis, which matters once you are hunting for shelf space or holding one piece in a hand for a while [1][3]. The upright can also reads clearly through a straight wall, where a sculpted body puts more curves between you and the water level.
If form is the deciding factor, pick on footprint and on which silhouette you would rather look at, because the material, price, and cleaning routine are the same on both [2][3]. The rest of the shapes in this category live in the Bubblers section of the shop.
One caveat on the family name: Alpine covers bongs and dab rigs as well as bubblers, so if you browse the collection rather than one product page, check which form each listing is before you compare prices [2].
- Same — the Steamboat and the Mesa both list at $42 and both use 100% borosilicate glass with walnut details [1][3].
- Same — both separate into glass plus detachable wood, and both follow the same salt-and-isopropyl routine on the glass [2].
- Different — the Steamboat measures 3.9 by 3.7 inches, while the Mesa is listed at 4.5 by 4 inches, so the Mesa takes up more room [1][3].
- Different — the Steamboat body is an upright can, while the Mesa is described as drawing on broad, sculpted plateau shapes [3][6].
| Spec | Steamboat Bubbler | Mesa Bubbler |
|---|---|---|
| Price | $42 | $42 |
| Material | Borosilicate glass with walnut details | Borosilicate glass with walnut details |
| Size | 3.9 by 3.7 inches | 4.5 by 4 inches |
| Body | Compact upright can | Broad sculpted plateau forms |
Who Is a Compact Upright Bubbler a Good Fit For?
A compact bubbler is a specific tool, and it is a poor fit for some of the people who buy one expecting a small bong. Here is the honest split.
Bowl size is the part worth being honest about. Bubbler bowls are often smaller than bong bowls, which means a compact piece may need repacking partway through where a larger water pipe would not [9]. If you want one long session per pack, this is not that piece.
If the fit sounds right, the extras are simple: a stable spot where the piece will not get knocked over, a bottle of isopropyl alcohol for the glass, a microfiber cloth for the walnut, and the habit of emptying the water after each session. Orders over the threshold also earn free shipping on orders $150+ if you are adding a cleaning kit or a second piece at the same time.
- Fits — small-footprint buyers, since a 3.9 by 3.7 inch body takes up roughly the space of a mug [1].
- Fits — anyone who wants water in the path without a full bong sitting on the table [9].
- Fits — one-hand users, because the upright can with a side carb is designed to be held and cleared by thumb [5].
- Fits — shoppers buying for materials and looks, since the glass-and-walnut build is the point of the piece [1].
- Does not fit — anyone who wants a removable bowl to clear the chamber, because this bowl is formed into the glass [5].
- Does not fit — anyone after a large chamber or long sessions with few repacks [9].
Frequently Asked Questions
Is the Steamboat Bubbler a bong?
No. A bong is the large water pipe with a bigger bowl and a chamber that holds smoke before you draw it, while the Steamboat is a compact upright piece you hold in one hand. It uses water the same way a bong does, through a downstem into a chamber, but it is small enough to sit on a shelf and it starts delivering shortly after the draw begins instead of filling a big chamber first.
Does the Steamboat Bubbler have a removable bowl?
The MJ Arsenal Steamboat Bubbler does not. Its 18mm funnel bowl is formed into the glass rather than sitting in a ground joint, so you cannot lift it out to clear the chamber the way you would on a bong. Clearing happens through the left-side carb instead: cover the hole while you light and draw, then uncover it so incoming air pushes the remaining smoke out through the mouthpiece.
How much water goes into a steamboat bubbler?
Only a small amount. Fill it so the downstem tip is under the water and the draw works, but keep the level low enough that drawing does not throw water up into the mouthpiece. It is easier to add a little more than to pour some back out, so start shallow, test the draw, and adjust from there. Change the water regularly rather than leaving it sitting between sessions.
Can you clean the walnut parts with isopropyl alcohol?
No. MJ Arsenal’s care instructions split the routine by part: the borosilicate glass is cleaned with isopropyl alcohol, while the non-glass sections are cleaned with a microfiber cloth and warm soapy water, and every part is rinsed before reassembly. The detachable walnut base and mouthpiece trim come off specifically so the glass can be soaked without the wood ever touching the liquid.
Why do two different companies sell a Steamboat Bubbler?
Because steamboat is a product name, not a standard pipe category. MJ Arsenal’s version is a borosilicate glass upright can with black walnut accents and a built-in funnel bowl. Ooze sells a piece under the same name that sleeves multiple glass chambers in silicone and ships with both a glass bowl and a quartz banger so it can serve as a water pipe or a dab rig. Check the material, chamber, and bowl spec on the listing, not the name.
So Is a Steamboat Bubbler the Right Piece for You?
The steamboat name will tell you almost nothing on its own. What tells you something is the three-part build, the borosilicate glass with walnut trim, the fixed 18mm funnel bowl, and the carb that clears the chamber because the bowl cannot be lifted out.
If that describes what you want, a small upright water piece you hold in one hand, with a body you can soak and wood you can wipe, then the MJ Arsenal Steamboat is a coherent choice at the compact end of the range. If you wanted a removable bowl, a larger chamber, or one long session per pack, you will be happier with a different form.
Either way, read the spec before you buy. The name on the box is marketing. The material, the chamber, and the bowl are the piece.
Sources
- MJ Arsenal: Steamboat Bubbler From the MJ Arsenal Alpine Series
- MJ Arsenal: Wood Bongs & Wood Dab Rigs | Alpine Collection
- MJ Arsenal: Mesa Bubbler
- Headshop.com: MJ Arsenal Alpine Series – Steamboat Bubbler
- Olivastu: MJ Arsenal Steamboat 10cm Glass Bubbler
- Vapospy: MJ Arsenal Steamboat Bubbler
- Ooze via Mid Atlantic Distribution: Ooze Steamboat Bubbler
- 420 Science: What is a Bubbler? Bubblers Vs. Pipes
- GRAV: The Difference Between Bongs and Bubbler Pipes
- Grasscity: The Science of Smooth: How Bong Water Filtration Actually Works
- Leafly: What is a carb? | Cannabis Glossary
- Health Canada: Cannabis accessories for inhalation: Minimizing your risk when smoking, vaping and dabbing
- Wikipedia: Borosilicate glass

